You can pair transmitters with receivers one after the other for a brand new code to get a hoop tone or increase transmitter buttons/receivers.
– Please pair transmitters with receivers one after the other for a brand new code prior to installing the transmitters on the door body.
– If you’ve got put in your transmitters on the door body, please use the small screwdriver (included) to open the transmitter and take the entrance cowl off, and take it near the receiver to pair them.
(Note: They can preserve their settings when energy is eliminated, no must reset).
Here’s methods to pair them
1. Plug one receiver into an everyday socket, and choose the sound you need on this receiver.
2. Press and maintain the quantity button on this receiver for five seconds or so, then the receiver will blink with a “ding” sound. And then push the transmitter button on the identical time (inside 5seconds) to pair with the receiver. Finally, you’ll hear the music you set.
3. The identical solution to pair different transmitter buttons with receivers.
What’s Included
2 * Receivers;
2 * Transmitter;
2 * 23A 12V Alkaline Battery in Transmitter
4 * Screws & Anchors;
1 * Mini Screw Driver
2 * Sticky Pads;
1 * User Manual
? IP55 waterproof doorbell button, wants 23A 12V Alkaline Battery.
? Long Operating Range Transmission as much as 150~300meter. Strong working sign for numerous materials door or wall, together with glass, metallic, wooden…
? Easy to increase 10+ door buttons or door bell chimes, additionally you may cut up them up to make use of.
? 58 completely different ring tones and 5 ranges quantity to vary – which may maintain their ringtone and quantity when energy is eliminated, no must reset.
? Easily Install – No batteries required for door bells, merely plug in socket; self-adhesive/screw-in to put in door button.
(*2*)










