Feature:
1. With steady working situation, the steady working temperature is 0 °C – +70 °C.
2. This product makes use of a microwave sensor (excessive frequency output is lower than 0.2lMw), so it’s protected and performs higher than infrared sensor.
3. It could be put in in merchandise fabricated from glass or plastic, as these supplies have little impact on the sensor.
Specification:
Item Type: Sensor Switch
Material: ABS
Color: As proven within the image
Size: Approx.9×4.2×3.8cm / 3.5×1.7×1.5in
Weight: Approx.87g/3.1oz
Working Voltage: AC220~240V
Supply Frequency: 50/60Hz
Installation Method: Indoor, ceiling set up
HF System: 5.8GHz +/- 75MHz CW radar
Power Consumption: Transmission Power: Load Power: 1200W
Detection Angle: 360°
Working Delay: 8 seconds to 12 minutes
Detection Distance: 1-8m/3.3-26.2ft
Light Control Illumination: 5~2000Lx
Working Temperature: -15 ℃ ~ 70 ℃
Stable Operating Temperature: 0 ℃ – +70 ℃
High Frequency Output: lower than 0.2lMw
Package List:
1 x Sensor Switch1 x Instruction Manual2 x Screw2 x Nut
The microwave sensor is an energetic sensor, and the HF sensor emits excessive frequency electromagnetic waves and receives their echoes.
This sensor detects modifications within the echo and even tiny actions inside its detection vary.
The microprocessor triggers the “lights up” command. Signals passing by means of the door, glass plates and skinny wall could also be detected.
The high-frequency output of this sensor is lower than 10mW, which is just one % of the cell energy of cellphones and microwave ovens.
This product is a transferring object sensor with a detection vary of 360 levels and an working frequency of 5.8 GHz.










