The PIR Motion Sensor will detect any motion 25ft (8m) in entrance of it, when below Armed standing, it can ship a sign to the management unit as quickly because it picks up any unlawful motion.
Because PIR movement detector will divide detection areas into many small segments, with the intention to optimize its detection efficiency, the best set up space is the pathway the place a burglar would cross if he have to entry into your residence and enterprise, some locations may be hallways or dwelling rooms.
Specification
Frequency: 433 MHz
Extendable antenna
Detection distance: 0-8 meters
Detection vary: 110 diploma horizontal view and 60 diploma vertical view
Battery: 1pcs 9V 6F22 battery (Included)
Standby present: lower than 12uA
Alarm present: lower than 15mA
Operating temp.: -10 to +50 levels
Installation mode: wall mounted
Installation peak: 2.5m (Recommended)
Package Contents
1* Wireless PIR Motion Detector
Free Batteries and Mounting Hardware Included
NOTE: Do not mount the PIR sensor to face window, oven, air conditioner, as transferring warmth sources and wind would set off the PIR.
Detection angle: 60 diploma vertical, 110 diploma horizontal. No lifeless spots have been left when put in within the nook of a room.
Detection vary is as much as 25ft (8m), which creates a big movement detecting space, and it’ll set off the alarm system to provide you with a warning when somebody or animals enter and transfer within the monitored space. Works fully wirelessly, so it may be put in at any location in your own home or enterprise to offer a second layer of safety, or cowl the world that can’t be secured by door contacts.
Communication distance from the management panel is as much as 250 toes away unobstructed. The antenna may be drawn out to maximise its transmission vary. Compatible with all KERUI Alary System, can’t work alone.
Operates with one (1) 9V 6F22 battery (Included). ON/OFF Switch and low battery indication. After detecting movement, the sensor “sleeps” for 5 seconds, good for saving the battery.
The really useful place is mounting the PIR Motion Sensor 8-9 toes above the bottom and pointed at your meant monitored space. NOTE: Do not mount the PIR sensor to face window, oven, air conditioner, as transferring warmth sources and wind would set off the PIR. Proper set up will assist lower or remove the false alarms that nobody needs.








